AccurlCMT 5 AXIS CNC PRESS BRAKE | DELEM 2D GRAPHICAL CONTROLLER | MODEL - EURO PRO
Confirm if additional costs apply
-
+17
AccurlCMT 5 AXIS CNC PRESS BRAKE | DELEM 2D GRAPHICAL CONTROLLER | MODEL - EURO PRO : $67,000 AUD ($73,700 Inc. GST)
Confirm if additional costs apply
Complete Machine Tools has a new best in class CNC press brake on offer which not only offers the best price to performance/options in its class but also features previously only available on high end expensive European machines. Large range of sizes available from 35 ton up to 3000 ton.
The NEW AccurlCMT Europro CNC press brakes offer some of the best features on the market such as -
- A servo motor connected to the hydraulic pump which only switches on when being used
- ECO saving technology, up to 50% less electrical consumption
- Fagor linear scales
- Hoerbiger hydraulic system
- Large opening between tools
- 450mm throat
- Top tool clamping allowing removal of tooling from the front of the machine, no more timely removal of tools from the side of the machine.
- Inbuilt LED lights in the covers
- ESA S630 controller
- Mechanical CNC controlled crowning
- Lasersafe guarding system
- 2 YEAR WARRANTY ON PARTS (not including Lasersafe)
In today's age with electricity prices in Australia being one of the highest in the world it makes sense to steer towards machines that can offer a reduction in your electricity costs. With the AccurlCMT Europro range you get that technology at an affordable price which previously was out of the reach of most.
With a servo motor attached to the hydraulic pump it switches the main pump on/off at the appropriate times. At the top of stroke the motor will switch off but as soon as the foot pedal is pressed the main motor is switched on. This reduces the amount of energy the machine needs by up to 50% but also the oil temperature remains low, componentry has less wear and tear so the benefits are huge with this technology the AccurlCMT machines have on as standard.
Check out our PDF info sheet or give us a call for a demo on one of our stock machines.
Confirm if additional costs apply
New LINIA CNC PLASMA CUTTING MACHINE | HYPERTHERM 105A | 1.5M X 3M | WATER TABLE
New LINIA CNC PLASMA CUTTING MACHINE | HYPERTHERM 125A | 1.5M X 3M | WATER TABLE
New 45 DEG / R1MM PRESS BRAKE TOOLING TOP PUNCH | EURO TYPE
New RADIUS BARS | 8 - 60MM DIAMETER KEPT IN STOCK
New 35 DEG / R5MM BULL NOSE PRESS BRAKE TOP PUNCH | EURO STYLE
New 85 DEG / R0.8MM GOOSENECK PRESS BRAKE TOOLING
New PRESS BRAKE RADIUS BAR HOLDER TO ACCOMDATE BARS UP TO 20MM DIA | EURO STYLE
New 35 DEG / R3MM PRESS BRAKE TOOLING TOP PUNCH | EURO TYPE
New 86 DEG / R0.6MM OFFSET PRESS BRAKE TOOLING TOP PUNCH | EURO TYPE
New FLATTENING COMBINATION BOTTOM PRESS BRAKE TOOLING | 12MM V OPENING | SPRING LOADED
New LINIA 3 IN 1 CNC PLASMA 45A + ETCHING & FLAME CUTTING MACHINE | 1.5 x 3M | DUAL SERVO DRIVE
New LINIA CNC PLASMA CUTTING MACHINE | HYPERTHERM 65A | 1.5M X 3M | WATER TABLE
New PUMA HNM-6A | 6MM VARIABLE ANGLE NOTCHER & PUNCH | DUAL STATION
New LINIA 3 IN 1 CNC PLASMA 65A + ETCHING & FLAME CUTTING MACHINE | 1.5 x 3M | DUAL SERVO DRIVE
New LINIA CNC PLASMA CUTTING MACHINE | HYPERTHERM 45A | 1.5M X 3M | WATER TABLE
New LINIA CNC PLASMA W/DRILL HEAD | USE YOUR OWN PLASMA
New LINIA CNC PLASMA CUTTING MACHINE | HYPERTHERM 85A | 1.5M X 3M | WATER TABLE
New PUMA HNM-6 NOTCHER | 6MM CAPACITY | FIXED ANGLE | HYDRAULIC