AUTOFOLD I-FOLD DUCT COIL LINE
Confirm if additional costs apply
-
+14
AUTOFOLD I-FOLD DUCT COIL LINE : $85,000 AUD ($93,500 Inc. GST)
Confirm if additional costs apply
The Engel Europa AUTOFOLD I-Fold duct coil line offers most of the functionality of a conventional coil line with the advantage of a vastly reduced 3m x 2m
floor space.
THe I-Fold gives the operator the ability to use standard coil widths in multiple gauges up to 1.6mm and manufacturing ductwork to any sizes from a minimum of 120mm x 120mm.
The I-Fold will produce flat sheet ‘I’ shape, ‘u’ shape and fully wrapped duct.
The machine’s fully hydraulic system is controlled by the Autofold v8 Control System, specifically designed for the machine. Input is through a dedicated 14” touch screen controller using the Windows CE platform running the Autofold standard program.
The Software is the regular Autofold software complete with the jobs program.
Ductwork is produced at an average rate of 1 duct per 20 seconds depending on duct size. The I-Fold retains the same production rate of the bigger Autofold machines.
The I-Fold comes with one ‘A’ frame coil holder as standard but up to six uncoilers can be added to the customer’s requirement.
TDC/F notching is available as an option.
Remote communication with your duct programming computer is also available.
Installation of the I-Fold can be carried out by the customer as the machine is shipped complete and requires only one 3 phase power supply (no air is required).
Confirm if additional costs apply
New LINIA CNC PLASMA CUTTING MACHINE | HYPERTHERM 105A | 1.5M X 3M | WATER TABLE
New LINIA CNC PLASMA CUTTING MACHINE | HYPERTHERM 125A | 1.5M X 3M | WATER TABLE
New 45 DEG / R1MM PRESS BRAKE TOOLING TOP PUNCH | EURO TYPE
New RADIUS BARS | 8 - 60MM DIAMETER KEPT IN STOCK
New 35 DEG / R5MM BULL NOSE PRESS BRAKE TOP PUNCH | EURO STYLE
New 85 DEG / R0.8MM GOOSENECK PRESS BRAKE TOOLING
New PRESS BRAKE RADIUS BAR HOLDER TO ACCOMDATE BARS UP TO 20MM DIA | EURO STYLE
New 35 DEG / R3MM PRESS BRAKE TOOLING TOP PUNCH | EURO TYPE
New 86 DEG / R0.6MM OFFSET PRESS BRAKE TOOLING TOP PUNCH | EURO TYPE
New FLATTENING COMBINATION BOTTOM PRESS BRAKE TOOLING | 12MM V OPENING | SPRING LOADED
New LINIA 3 IN 1 CNC PLASMA 45A + ETCHING & FLAME CUTTING MACHINE | 1.5 x 3M | DUAL SERVO DRIVE
New LINIA CNC PLASMA CUTTING MACHINE | HYPERTHERM 65A | 1.5M X 3M | WATER TABLE
New PUMA HNM-6A | 6MM VARIABLE ANGLE NOTCHER & PUNCH | DUAL STATION
New LINIA 3 IN 1 CNC PLASMA 65A + ETCHING & FLAME CUTTING MACHINE | 1.5 x 3M | DUAL SERVO DRIVE
New LINIA CNC PLASMA CUTTING MACHINE | HYPERTHERM 45A | 1.5M X 3M | WATER TABLE
New LINIA CNC PLASMA W/DRILL HEAD | USE YOUR OWN PLASMA
New LINIA CNC PLASMA CUTTING MACHINE | HYPERTHERM 85A | 1.5M X 3M | WATER TABLE
New PUMA HNM-6 NOTCHER | 6MM CAPACITY | FIXED ANGLE | HYDRAULIC